Technical guide

Tungsten vs Molybdenum Electrodes

Molybdenum electrodes are cheaper and sometimes offered as a substitute. For TIG/GTAW they are rarely the right answer. This page draws the line on where each metal belongs.

Head to head

Tungsten vs Molybdenum
PropertyTungsten (W)Molybdenum (Mo)
Melting point~3410 °C (highest of all metals)~2620 °C
Density19.25 g/cm³10.2 g/cm³
Arc heat toleranceexcellent — holds a sharp tip at high currentlower — tip erodes/balls sooner
Electron emissiongood, improved by Th/La/Ce oxidespoorer for stable TIG arc
Typical useTIG/GTAW & plasma electrodesresistance-welding electrodes, furnace parts
Costhigherlower

Why tungsten wins for TIG

The TIG arc concentrates extreme heat on a non-consumable tip. Tungsten's ~3410 °C melting point and low vapour pressure let the tip stay sharp and stable; molybdenum's ~2620 °C limit means the tip softens, balls and contaminates the pool at currents where tungsten is comfortable. That is why ISO 6848 / AWS A5.12 electrode classifications are tungsten-based, not molybdenum.

Where molybdenum is acceptable

Molybdenum and Mo-alloys (e.g. TZM) are standard for resistance welding electrodes and high-temperature furnace fixtures, where the duty is conductive/structural rather than sustaining a TIG arc. If a supplier offers "molybdenum TIG electrodes" at a bargain, treat it as a red flag for arc stability and weld cleanliness.

Buyer guidance

For TIG, specify tungsten to ISO 6848 with the oxide that matches your current (see the color chart and amperage chart). We supply the full WP/WT20/WC20/WL15/WL20/WZ8/WY20 range; ask for the grade that fits your machine, not the cheapest metal.

All electrode typesAmperage chartRequest a quote

WhatsApp